3
Configuring the Switch
• EAP Frames — Determines how EAP packets are managed when port based
authentication is disabled on the device. EAP packets are used to transmit
authentication information. The possible field values are:
• Filtering — Filters EAP packets when port based authentication is disabled
globally.
• Bridging — Indicates that if the port based authentication is globally disabled,
untagged and tagged EAP packets are flooded, and are subject to ingress and
egress VLAN rules.
Web – Click Security, 802.1x, System Information.
CLI – The following is an example of the device Authentication CLI commands:
Console(config)#
4-265
Console(config)#
4-264
156
Figure 3-72. System Information Page
dot1x system-auth-control
aaa authentication dot1x default
none