Defining Mstp Interface Settings; Figure 3-98. Mstp Instance Settings Page - Alcatel OmniStack LS 6248 User Manual

Command Attributes
• Instance ID — Specifies the VLAN group to which the interface is assigned.
• Included VLAN — Maps the selected VLANs to the selected instance. Each VLAN
belongs to one instance.
• Bridge Priority — Specifies the selected spanning tree instance device priority.
The field range is 0-61440.
• Designated Root Bridge ID — Indicates the ID of the bridge with the lowest path
cost to the instance ID.
• Root Port — Indicates the selected instance's root port.
• Root Path Cost — Indicates the selected instance's path cost.
• Bridge ID — Indicates the bridge ID of the selected instance.
• Remaining Hops — Indicates the number of hops remaining to the next
destination.
Web – Click Layer 2, Spanning Tree, MSTP, Instance Settings. Define the fields and
Click Apply.
CLI –The following is an example of the MSTP Instance Settings commands:
Console(config)# spanning-tree mst configuration
4-556
Console(config-mst)# instance 1 add vlan 10-20
4-556

Defining MSTP Interface Settings

You can configure the STP interface settings for an MSTP Instance using the MSTP

Figure 3-98. MSTP Instance Settings Page

Configuring Spanning Tree
3
201