Snmp-Server Set; Show Snmp - Alcatel OmniStack LS 6248 User Manual

Related Commands

show snmp

snmp-server set

The
snmp-server set
value.
Syntax
snmp-server set
Parameters
• variable-name — MIB variable name.
• name value — List of name and value pairs. In the case of scalar MIBs, only
a single pair of name values. In the case of an entry in a table, at least one
pair of name and value followed by one or more fields.
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Although the CLI can set any required configuration, there might be a situation
where a SNMP user sets a MIB variable that does not have an equivalent
command. In order to generate configuration files that support those
situations, the snmp-server set command is used.
This command is case-sensitive.
Example
The following example configures the scalar MIB sysName with the value
Console(config)# snmp-server set sysName sysname Alcatel
Related Commands
show snmp
show snmp
The Privileged EXEC mode command displays the SNMP status.
show snmp
Syntax
show snmp
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Global Configuration mode command defines the SNMP MIB
variable-name name1 value1 [name2 value2 ...]
4
SNMP Commands
.
Alcatel
531