Stack Master - Alcatel OmniStack LS 6248 User Manual

Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example specifies the device host name.
Console(config)# hostname Alcatel
Alcatel(config)#
Related Commands
telnet

stack master

The Global Configuration mode command enables forcing the
stack master
selection of a stack master. To return to the default configuration, use the
this command.
Syntax
stack master unit
no stack master
Parameters
• unit — Unit number of the new master (Range: 1-2)
Default Setting
Disables forcing the selection of a stack master.
Command Mode
Global Configuration mode
Command Usage
The following algorithm is used to select a unit as the master:
• If only one master-enabled unit is in the stack (1 or 2), it becomes the
master.
• If a unit configured as a forced master, it becomes the master.
If a forced master unit is removed from a stack and placed in a different stack
with another forced master unit, both are considered to be forced, and the
election criteria continue as follows:
• The unit with the longer up-time is elected master. Units are considered to
have the same up-time if they were powered up within ten minutes of each
other.
unit
System Management Commands
4
no form of
613