Show Rmon Alarm-Table - Alcatel OmniStack LS 6248 User Manual

- If the first sample (after this entry becomes valid) is greater than or equal to
rthreshold and direction is equal to
alarm is generated. If the first sample (after this entry becomes valid) is less
than or equal to fthreshold and direction is equal to
a single falling alarm is generated.
• name — Specifies the name of the person who configured this alarm. If
unspecified, the name is an empty string.
Default Setting
The type is absolute
The startup direction is
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
• Alarm index — 1000
• MIB_OBJECT_ID — MIB Number
• Sample interval — 360000 seconds
• Rising threshold — 1000000
• Falling threshold — 1000000
• Rising threshold event index — 10
• Falling threshold event index — 20
Console(config)#
Related Commands

show rmon alarm-table

show rmon alarm
show rmon alarm-table
The show rmon alarm-table
Syntax
show rmon alarm-table
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
.
rising-falling
rmon alarm
1000 Alcatel 360000 1000000 1000000 10 20
User EXEC mode command displays the alarms table.
or
rising rising-falling
.
RMON Commands
, a single rising
or
falling rising-falling
4
,
511