Power Inline Priority; Power Inline Usage-Threshold - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

power inline priority

The
power inline priority
configures the inline power management priority of the interface. To return to the
default configuration, use the
Syntax
power inline priority {critical | high | low}
no power inline priority
Parameters
•
critical —
•
high —
• Indicates that operating the powered device has low priority.
low —
Default Setting
The default setting is low priority.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the device connected to Ethernet interface 1/e1
as a high-priority powered device.
Console(config)# interface ethernet 1/e1
Console(config-if)#
Related Commands
power inline
power inline powered-device

power inline usage-threshold

show power inline
power inline usage-threshold
The
power inline usage-threshold
the threshold for initiating inline power usage alarms. To return to the default
configuration, use the
Syntax
power inline usage-threshold
no power inline usage-threshold
462
Interface Configuration (Ethernet) mode command
form of this command.
no
Indicates that operating the powered device is critical.
Indicates that operating the powered device has high priority.
power inline priority high
Global Configuration mode command configures
form of this command.
no
percentage