Clock Summer-Time - Alcatel OmniStack LS 6248 User Manual

Default Setting
Clock set to UTC.
Command Mode
Global Configuration mode
Command Usage
The system internally keeps time in UTC, so this command is used only for
display purposes and when the time is manually set.
Example
The following example sets the timezone to 6 hours difference from UTC.
#
Console(config)
Related Commands
clock set
clock source

clock summer-time

clock summer-time
The
clock summer-time
system to automatically switch to summer time (daylight saving time). To configure
the software not to automatically switch to summer time, use the
command.
Syntax
clock summer-time recurring
month hh:mm}} [
clock summer-time date
[ offset] [
offset
clock summer-time date
[ offset] [
offset
no clock summer-time recurring
Parameters
• recurring
corresponding specified days every year.
• date — Indicates that summer time should start on the first specific date
listed in the command and end on the second specific date in the command.
• — The summer time rules are the United States rules.
usa
• — The summer time rules are the European Union rules.
eu
• week — Week of the month. (Range: 1 - 5,
• day — Day of the week (Range: first three letters by name, like
• date — Date of the month. (Range:1 - 31)
clock timezone -6 zone CST
Global Configuration mode command configures the
{ usa
offset] [
offset zone
date month year hh:mm date month year hh:mm
acronym]
zone
month date year hh:mm month date year hh:mm
acronym]
zone
— Indicates that summer time should start and end on the
| eu | {week day month hh:mm week day
acronym]
,
first last
Clock Commands
form of this
no
)
)
sun
351
4