Spanning-Tree Mst Cost - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
(Range: 1-Product Specific upper limit)
• priority — The port priority. (Range: 0 - 240 in multiples of 16)
Default Setting
The default port priority for IEEE Multiple Spanning Tree Protocol (MSTP) is
128.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the port priority of port g1 to 142.
Console(config)#
Console(config-if)#
Related Commands
spanning-tree mst priority
spanning-tree mst max-hops

spanning-tree mst cost

spanning-tree mst configuration
instance (mst)
name (mst)
revision (mst)
show (mst)
exit (mst)
abort (mst)
show spanning-tree
spanning-tree mst cost
The
spanning-tree mst cost
path cost for multiple spanning tree (MST) calculations. If a loop occurs, the
spanning tree considers path cost when selecting an interface to put in the
forwarding state. To return to the default configuration, use the
command.
Syntax
spanning-tree mst i
no spanning-tree mst
554
interface ethernet
spanning-tree mst
Interface Configuration mode command configures the
nstance-id
cost
instance-id
cost
g1
port-priority
1
cost
142
form of this
no