Switchport General Allowed Vlan - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Example
The following example configures VLAN number 123 as the native VLAN when
Ethernet port 1/e16 is in trunk mode.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport trunk native vlan 123
Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan

switchport general allowed vlan

switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport general allowed vlan
The switchport general allowed vlan
or removes VLANs from a general port.
Syntax
switchport general allowed vlan add
switchport general allowed vlan remove
Parameters
• vlan-list — Specifies the list of VLAN IDs to be added. Separate
add
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
•
remove
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
•
tagged
•
untagged
VLANs.
Default Setting
If the port is added to a VLAN without specifying tagged or untagged, the
default setting is tagged.
672
vlan-list — Specifies the list of VLAN IDs to be removed. Separate
— Indicates that the port transmits tagged packets for the VLANs.
— Indicates that the port transmits untagged packets for the
Interface Configuration mode command adds
vlan-list [
tagged
vlan-list
| ]
untagged