Dot1X Timeout Supp-Timeout - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
(EAP)-request/identity frame (assuming that no response is received) to the client,
before restarting the authentication process. To return to the default configuration,
use the no form of this command.
Syntax
dot1x max-req
no dot1x max-req
Parameters
• count — Number of times that the device sends an EAP-request/identity
frame before restarting the authentication process. (Range: 1-10)
Default Configuration
The default number of times is 2.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
The default value of this command should be changed only to adjust for
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients. and authentication servers.
Example
The following example sets the number of times that the device sends an
EAP-request/identity frame to 6 .
Console(config)#
Console(config-if)#
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period

dot1x timeout supp-timeout

dot1x timeout server-timeout
show dot1x
show dot1x users
dot1x timeout supp-timeout
The
dot1x timeout supp-timeout
time for the retransmission of an Extensible Authentication Protocol (EAP)-request
272
count
interface ethernet
dot1x max-req
Interface Configuration mode command sets the
1/e16
6