Bridge Aging-Time; Clear Bridge - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

bridge aging-time

The
bridge aging-time
aging time. To restore the default configuration, use the
Syntax
bridge aging-time
no bridge aging-time
Parameters
• seconds — Time in seconds. (Range: 10-630 seconds)
Default Setting
The default is 300 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
In this example the bridge aging time is set to 250.
Console(config)#
Related Commands
bridge address

clear bridge

clear bridge
The
clear bridge
from the forwarding database.
Syntax
clear bridge
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
In this example, the bridge tables are cleared.
clear bridge
Console#
320
Global Configuration mode command sets the address table
seconds
bridge aging-time
Privileged EXEC mode command removes any learned entries
form of this command.
no
250