3
Configuring the Switch
CLI – The following is an example of the CLI commands used to rewrite DSCP
values:
Console(config)#
4-491
Defining QoS DSCP Mapping Settings
When traffic exceeds user-defined limits, use the DSCP Mapping Page to configure
the DSCP tag to use in place of the incoming DSCP tags.
Command Attributes
• DSCP In — DSCP tag on incoming packets.
• DSCP Out — Sets a new DSCP tag on outgoing packets.
Web – Click Policy, Advanced Mode, Policy Map, DSCP Mapping. Define the fields,
and click Apply.
244
Figure 3-124. DSCP Rewrite Page
qos dscp-mutation