Bridge Multicast Address - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
bridge multicast forbidden forward-all
show bridge multicast filtering

bridge multicast address

The
bridge multicast address
registers a MAC-layer multicast address in the bridge table and statically adds ports
to the group. To unregister the MAC address, use the
Syntax
bridge multicast address
bridge multicast address
interface-list |
no bridge multicast address
Parameters
• — Adds ports to the group. If no option is specified, this is the default
add
option.
•
remove
• mac-multicast-address — A valid MAC multicast address.
• interface-list — Separate nonconsecutive Ethernet ports with a comma and
no spaces; a hyphen is used to designate a range of ports.
• port-channel-number-list — Separate nonconsecutive port-channels with a
comma and no spaces; a hyphen is used to designate a range of ports.
Default Setting
No multicast addresses are defined.
Command Mode
Interface configuration (VLAN) mode
Command Usage
If the command is executed without
registers the group in the bridge database.
Static multicast addresses can only be defined on static VLANs.
Examples
The following example registers the MAC address:
Console(config)#
Console(config-if)#
The following example registers the MAC address and adds ports statically.
Console(config)#
Console(config-if)#
ethernet
1/e1-e9, 2/e2
316
Interface Configuration (VLAN) mode command
{mac-multicast-address}
{mac-multicast-address [
port-channel-number-list}
port-channel
{mac-multicast-address}
— Removes ports from the group.
interface vlan
bridge multicast address
interface vlan
bridge multicast address
form of this command.
no
add
or , the command only
add remove
8
01:00:5e:02:02:03
8
01:00:5e:02:02:03
| ] {
remove ethernet
add