Syslog Commands; Logging On - Alcatel OmniStack LS 6248 User Manual

Syslog Commands

Command Function

logging on

Controls error message logging. This command sends debug or
error messages to a logging process, which logs messages to
designated locations asynchronously to the process that
generated the messages. To disable the logging process, use the
no form of this command.
logging Logs messages to a syslog server. To delete the syslog server
with the specified address from the list of syslogs, use the no
form of this command.
logging console Limits messages logged to the console based on severity. To
disable logging to the console, use the no form of this command.
logging buffered Limits syslog messages displayed from an internal buffer based
on severity. To cancel using the buffer, use the no form of this
command.
logging buffered Changes the number of syslog messages stored in the internal
size buffer. To return to the default configuration, use the no form of
this command.
clear logging Clears messages from the internal logging buffer.
logging file Limits syslog messages sent to the logging file based on severity.
To cancel using the buffer, use the no form of this command.
clear logging file Clears messages from the logging file.
aaa logging Enables logging AAA login events. To disable logging AAA login
events, use the no form of this command.
file-system logging Enables logging file system events. To disable logging file system
events, use the no form of this command.
management Enables logging management access list (ACL) events. To
logging disable logging management access list events, use the no form
of this command.
show logging Displays the state of logging and the syslog messages stored in
the internal buffer.
show logging file Displays the state of logging and the syslog messages stored in
the logging file.S
show syslog-servers Displays the settings of the syslog servers.
logging on
The Global Configuration mode command controls error message
logging on
logging. This command sends debug or error messages to a logging process, which
logs messages to designated locations asynchronously to the process that
generated the messages. To disable the logging process, use the
command.
Table 4-30. Syslog Commands
Syslog Commands
Mode Page
GC 4-591
GC 4-592
GC 4-593
GC 4-594
GC 4-595
PE 4-595
GC
PE 4-596
GC 4-597
GC 4-598
GC 4-598
PE 4-599
PE 4-601
PE 4-603
form of this
no
591
4