Bridge Multicast Forbidden Address - Alcatel OmniStack LS 6248 User Manual

Related Commands
bridge multicast filtering

bridge multicast forbidden address

bridge multicast forward-all
bridge multicast forbidden forward-all
bridge multicast forbidden address
The
bridge multicast forbidden address
command forbids adding a specific multicast address to specific ports. Use the
form of this command to return to the default configuration.
Syntax
bridge multicast forbidden address
ip-multicast-address} {
port-channel-number-list}
no bridge multicast forbidden address
Parameters
• — Adds ports to the group.
add
• — Removes ports from the group.
remove
• mac-multicast-address — A valid MAC multicast address.
• interface-list — Separate nonconsecutive Ethernet ports with a comma and
no spaces; hyphen is used to designate a range of ports.
• port-channel-number-list — Separate nonconsecutive valid port-channels
with a comma and no spaces; a hyphen is used to designate a range of
port-channels.
Default Setting
No forbidden addresses are defined.
Command Modes
Interface Configuration (VLAN) mode
Command Usage
Before defining forbidden ports, the multicast group should be registered.
Examples
In this example, MAC address 0100.5e02.0203 is forbidden on port 2/e9 within
VLAN 8.
Console(config)#
Console(config-if)#
Console(config-if)#
add ethernet
Related Commands
bridge multicast filtering
|
add remove
interface vlan
bridge multicast address
bridge multicast forbidden address
2/e9
Address Table Commands
Interface Configuration (VLAN) mode
{mac-multicast-address |
} { interface-list |
ethernet
{mac-multicast-address}
8
0100.5e.02.0203
4
no
port-channel
0100.5e02.0203
317