Management Access-Class - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Parameters
• interface-number — A valid Ethernet port number.
• vlan-id — A valid VLAN number.
• port-channel-number — A valid port-channel number.
• ip-address — A valid source IP address.
• mask — A valid network mask of the source IP address.
• prefix-length — Specifies the number of bits that comprise the source
mask
IP address prefix. The prefix length must be preceded by a forward slash
(/). (Range: 0-32)
• service — Service type. Possible values:
Default Setting
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
Command Usage
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP
address is defined on the appropriate interface.
The system supports up to 128 management access rules.
Example
The following example denies all ports in the access list called mlist.
Console(config)#
Console(config-macl)#
Related Commands
management access-list
permit (Management)
show management access-list

management access-class

The
management access-class
management connections by defining the active management access list. To disable
this restriction, use the
Syntax
management access-class
no management access-class
Parameters
•
console-only
console.
• name — Specifies the name of the access list to be used.
448
management access-list
deny
Global Configuration mode command restricts
no form of this command.
{
console-only
— Indicates that the device can be managed only from the
, ,
telnet ssh http, https
mlist
| name}
and .
snmp