Deny (Management) - Alcatel OmniStack LS 6248 User Manual

permit ip-source
interface-number |
service]
Parameters
• interface-number — A valid Ethernet port number.
• vlan-id — A valid VLAN number.
• port-channel-number — A valid port channel index.
• ip-address — A valid source IP address.
• mask — A valid network mask of the source IP address.
• prefix-length — Number of bits that comprise the source IP address prefix.
The prefix length must be preceded by a forward slash (/). (Range: 0 - 32)
• service — Service type. Possible values:
Default Setting
If no permit rule is defined, the default is set to deny
Command Mode
Management Access-list Configuration mode
Command Usage
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP
address is defined on the appropriate interface.
The system supports up to 128 management access rules.
Example
The following example permits all ports in the mlist access list.
Console(config)#
Console(config-macl)#
Related Commands
management access-list

deny (Management)

show management access-list
deny (Management)
The Management Access-List Configuration mode command defines a deny
deny
rule.
Syntax
[
deny ethernet
port-channel-number] [
deny ip-source
interface-number |
service]
ip-address [
mask
vlan-id |
vlan port-channel
management access-list
permit
interface-number |
service service]
ip-address [ mask | prefix-length] [
mask
vlan-id |
vlan port-channel
Management ACL Commands
mask | prefix-length] [
port-channel-number | ] [
,
telnet ssh
.
mlist
vlan-id |
vlan port-channel
port-channel-number | ] [
ethernet
service
, and
http, https snmp
ethernet
service
4
.
447