Defining Stp On Interfaces; Figure 3-94. Stp General Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
CLI – This command displays global STA settings, followed by settings for each port.
Console(config)# spanning-tree
4-540
console(config)# spanning-tree mode rstp
4-540
Console(config)# spanning-tree bpdu flooding
4-550
Console(config)# spanning-tree pathcost method long
4-549
Console(config)# interface ethernet 1/e15
4-376
Console(config)# spanning-tree priority 12288
4-544
Console(config)# spanning-tree hello-time 5
4-542
Console(config)# spanning-tree max-age 12
4-543
Console(config)# spanning-tree forward-time 25
4-541

Defining STP on Interfaces

Network administrators can assign STP settings to specific interfaces using the
Interface Configuration Page. The Global LAGs section displays the STP
information for Link Aggregated Groups. Adhere to the following guidelines when
194

Figure 3-94. STP General Page