Alcatel OmniStack LS 6248 User Manual page 584

4
Command Line Interface
Parameters
•
current
•
pending
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
Command Usage
The pending MST region configuration takes effect only after exiting the MST
configuration mode.
Example
The following example displays a pending MST region configuration.
Console(config-mst)#
Pending MST configuration
Name: Region1
Revision: 1
Instance
--------
0
1
Related Commands
spanning-tree mst priority
spanning-tree mst max-hops
spanning-tree mst port-priority
spanning-tree mst cost
spanning-tree mst configuration
instance (mst)
name (mst)
revision (mst)
exit (mst)
abort (mst)
show spanning-tree
560
— Indicates the current region configuration.
— Indicates the pending region configuration.
show pending
Vlans Mapped
------------
1-9,21-4094
10-20
State
-------
Enabled
Enabled