Show Qos Aggregate-Policer - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
exceeds 124,000 bps or the normal burst size exceeds 96000 bps, the packet is
dropped..
Console (config)#
exceed-action drop
Related Commands
police

show qos aggregate-policer

police aggregate
show qos aggregate-policer
The
show qos aggregate-policer
aggregate policer parameter.
Syntax
show qos aggregate-policer
Parameters
• aggregate-policer-name — Specifies the name of the aggregate policer to
be displayed.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines.
Example
The following example displays the parameters of the aggregate policer called
policer1.
show qos aggregate-policer
Console>
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map
Related Commands
police
qos aggregate-policer
police aggregate
480
qos aggregate-policer
User EXEC mode command displays the
[aggregate-policer-name]
policer1 124000 96000
policer1