Clear Lldp Rx - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Syntax
lldp med location coordinate data
no lldp med location coordinate
lldp med location civic-address data
no lldp med location civic-address
lldp med location ecs-elin data
no lldp med location ecs-elin
Parameters
• coordinate — Displays the location is specified as coordinates.
• civic-address — Displays the location is specified as civic address.
• ecs-elin — Displays the location is specified as ECS ELIN.
• data — Displays the data format is as defined in ANSI/TIA 1057. Specifies
the location as dotted hexadecimal data: Each byte in hexadecimal
character strings is two hexadecimal digits. Each byte can be separated by
a period or colon. For coordinated: 16. For civic address: 6 - 160
hexadecimal digits . For ECS ELIN: 10 - 25 hexadecimal digits.
Default Configuration
The location is not configured.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no guidelines for this command.

clear lldp rx

The clear lldp rx Privileged EXEC mode command restarts the LLDP RX state
machine and clearing the neighbors table.
Syntax
clear lldp rx [ethernet interface]
Parameters
• interface — Ethernet port
Command Mode
Privileged EXEC
User Guidelines
There are no guidelines for this command.
336