Match - Alcatel OmniStack LS 6248 User Manual

Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example shows the class map for class1.
Console> show class-map class1
Class Map match-any class1 (id4)
Match Ip dscp 11 21
Related Commands
class-map

match

The Class-map Configuration mode command defines the match criteria for
match
classifying traffic. To delete the match criteria, use the
Syntax
match access-group
no match access-group
Parameters
• acl-name — Specifies the name of an IP or MAC ACL.
Default Setting
No match criterion is supported.
Command Mode
Class-map Configuration mode.
Command Usage
There are no user guidelines for this command.
Example
The following example defines the match criterion for classifying traffic as an access
group called Alcatel in a class map called class1..
Console (config)# class-map class1
Console (config-cmap)# match access-group alcatel
Related Commands
ip-access-list
mac access-list
acl-name
acl-name
QoS Commands
form of this command.
no
4
471