Spanning-Tree Hello-Time - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
spanning-tree cost
spanning-tree port-priority
spanning-tree portfast
spanning-tree link-type
show spanning-tree

spanning-tree hello-time

The
spanning-tree hello-time
spanning tree bridge hello time, which is how often the device broadcasts hello
messages to other devices.To return to the default configuration, use the
this command.
Syntax
s
panning-tree hello-time
no spanning-tree hello-time
Parameters
• seconds — Time in seconds. (Range: 1 - 10)
Default Setting
The default hello time for IEEE Spanning Tree Protocol (STP) is 2 seconds.
Command Modes
Global Configuration mode
Command Usage
When configuring the hello time, the following relationship should be kept:
Max-Age >= 2*(Hello-Time + 1)
Example
The following example configures spanning tree bridge hello time to 5 seconds.
Console(config)# spanning-tree hello-time 5
Related Commands
spanning-tree forward-time
spanning-tree max-age
spanning-tree priority
spanning-tree disable
spanning-tree cost
spanning-tree port-priority
spanning-tree portfast
542
Global Configuration mode command configures the
seconds
form of
no