4
Command Line Interface
bridge multicast address
bridge multicast forward-all
bridge multicast forbidden forward-all
show bridge multicast filtering
bridge multicast forward-all
The
bridge multicast forward-all
enables forwarding all multicast packets on a port. To restore the default
configuration, use the
Syntax
bridge multicast forward-all
port-channel
no bridge multicast forward-all
Parameters
•
— Force forwarding all multicast packets.
add
•
remove
• interface-list — Separate nonconsecutive Ethernet ports with a comma and
no spaces; a hyphen is used to designate a range of ports.
• port-channel-number-list — Separate nonconsecutive port-channels with a
comma and no spaces; a hyphen is used to designate a range of
port-channels.
Default Setting
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
There are no user guidelines for this command.
Example
In this example, all multicast packets on port 1/e8 are forwarded.
Console(config)#
Console(config-if)#
Related Commands
bridge multicast filtering
bridge multicast address
bridge multicast forbidden address
bridge multicast forbidden forward-all
show bridge multicast filtering
318
Interface Configuration (VLAN) mode command
form of this command.
no
{
add
port-channel-number-list}
— Do not force forwarding all multicast packets.
interface vlan 2
bridge multicast forward-all add ethernet 1/e8
|
} {
remove
ethernet
interface-list |