LACP Commands
Command
Function
lacp system-priority Configures the system priority. To return to the default
configuration, use the no form of this command.
lacp port-priority
Configures physical port priority. To return to the default
configuration, use the no form of this command.
lacp timeout
Assigns an administrative LACP timeout. To return to the default
configuration, use the no form of this command.
show lacp ethernet
Displays LACP information for Ethernet ports.
show lacp
Displays LACP information for a port-channel.
port-channel
lacp system-priority
The
lacp system-priority
system priority. To return to the default configuration, use the
command.
Syntax
lacp system-priority
no lacp system-priority
Parameters
• value — Specifies system priority value. (Range: 1 - 65535)
Default Setting
The default system priority is 1.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
Console(config)#
Related Commands
show lacp port-channel
Table 4-17. LACP Commands
Global Configuration mode command configures the
value
lacp system-priority
120
LACP Commands
Mode
Page
GC
4-431
ICE
4-432
ICE
4-432
PE
4-433
PE
4-435
form of this
no
4
431