Defining Bandwidth Settings; Figure 3-118. Queue Priority Page - Alcatel OmniStack LS 6248 User Manual

• WRR Weight — Assigns WRR weights to queues. This field shows the wrr weight
assigned to the queue. This field can not be modified.
• % of WRR Bandwidth — Indicates the amount of bandwidth assigned to the QoS
queue.
Web – Click Policy, General QoS, General, Queue Priority. Define the fields, and
click Apply.
CLI – The following is an example of the CLI commands used to enable QoS:
console(config)# priority-queue out num-of-queues 4
4-482

Defining Bandwidth Settings

The Bandwidth Configuration Page allows network managers to define the
bandwidth settings for specified egress and ingress interfaces. Modifying queue
scheduling affects the queue settings globally.
Rate Limits and Shaping are defined per interface:
• Rate Limit sets the maximum bandwidth allowed on an interface.
• Shaping of network traffic may be defined over LAGs. LAGs can accommodate GE
and FE interfaces.
Command Attributes
• Unit No. — Indicates the stacking member for which this bandwidth configuration
is displayed.
• Interface — Indicates the interface for which this bandwidth information is
displayed. The possible field values are:

Figure 3-118. Queue Priority Page

Configuring Quality of Service
3
237