Example
The following example configures an SNMPv3 host.
Console(config)#
Related Commands
show snmp
snmp-server trap authentication
The
snmp-server trap authentication
the device to send SNMP traps when authentication fails. To disable SNMP failed
authentication traps, use the
Syntax
snmp-server trap authentication
no snmp-server trap authentication
Default Setting
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables SNMP failed authentication traps.
Console(config)# snmp-server trap authentication
Related Commands
show snmp
snmp-server contact
The snmp-server contact Global Configuration mode command configures the
system contact (sysContact) string. To remove system contact information, use the
form of the command.
no
Syntax
snmp-server contact
no snmp-server contact
Parameters
• text — Specifies the string that describes system contact information.
(Range: 0-160 characters)
snmp-server v3-host
Global Configuration mode command enables
form of this command.
no
text
SNMP Commands
192.168.0.20 john
4
noauth
529