Default-Vlan Vlan; Interface Vlan - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

default-vlan vlan

Use the vlan VLAN Configuration mode command to create a VLAN. To restore the
default configuration or delete a VLAN, use the no form of this command.
Syntax
default-vlan vlan vlan-id
no default-vlan vlan
Parameters
• vlan-id — VLAN ID of the default VLAN.
Default Configuration
The default configuration is set to one.
Command Mode
VLAN Configuration mode
User Guidelines
There are no user guidelines for this command.

interface vlan

The interface vlan
Configuration (VLAN) mode.
Syntax
interface vlan
Parameters
• vlan-id — Specifies an existing VLAN ID.
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
If the VLAN doesn't exist ("ghost VLAN") only a partial list of the commands
are available under the interface VLAN context. The commands that are
supported for VLAN that don't exist are:
1) IGMP snooping control
2) Bridge multicast configuration
664
Global Configuration mode command enters the Interface
vlan-id