Alcatel OmniStack LS 6248 User Manual page 390

4
Command Line Interface
xmodem:
unit://member/
image
unit://member/
boot
null:
backup-config
unit://member/
backup-config
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
Up to five backup configuration files are supported on the device.
The location of a file system dictates the format of the source or destination
URL.
The entire copying process may take several minutes and differs from protocol
to protocol and from network to network.
*.prv and *.sys files cannot be copied.
Understanding Invalid Combinations of Source and Destination
Some invalid combinations of source and destination exist. Specifically, you
cannot copy if one of the following conditions exist:
The source file and destination file are the same file.
is the destination file. The source file can be copied to
xmodem:
and only.
null:
tftp:// is the source file and destination file on the same copy.
The following table describes copy characters:
Character
366
Source for the file from a serial connection that uses the Xmodem
protocol.
Image file on one of the units. To copy from the master to all units,
specify * in the member field.
Boot file on one of the units. To copy from the master to all units,
specify * in the member field.
Null destination for copies or files. A remote file can be copied to null
to determine its size.
Represents the backup configuration file.This is a user-defined
name for up to four backup configuration files.
Backup configuration on one of the units.
Description
,
image boot