Alcatel OmniStack LS 6248 User Manual page 367

Location information, if exists, should be displayed too.
The following table describes significant LLDP fields:
F ie l d
Port
Device ID
Port ID
Hold time
Capabilities
System name
System description
Port description
Management address
Auto-negotiation support
Auto-negotiation status
Auto-negotiation Advertised Capabilities
Operational MAU type
LLDP MED
Capabilities
Device type
D e s c r i p t i o n
The port number.
The configured ID (name) or MAC address of the
neighbor device.
The port ID of the neighbor device.
The remaining amount of time, in seconds, the
current device will hold the LLDP advertisement
from the neighbor device before discarding it.
The capabilities discovered on the neighbor device.
Possible values are:
B - Bridge
R - Router
W - WLAN Access Point
T - Telephone
D - DOCSIS cable device
H - Hostr - Repeater
O - Other
The neighbor device administratively assigned
name.
The system description of the neighbor device.
The port description of the neighbor device.
The management address of the neighbor device.
Specify if the port support auto-negotiation.
Specify if auto-negotiation is enabled on the port.
The speed/duplex/flow-control capabilities of the
port that are advertised by the auto-negotiation.
Indicates the MAU type of the port.
Define the sender's LLDP-MED capabilities.
Contains a value that indicates whether the sender
is a Network Connectivity Device or Endpoint
Device, and if an Endpoint, which Endpoint Class it
belongs to.
4
LLDP Commands
343