Enable Authentication - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command Usage
Changing login authentication from default to another value may disconnect
the telnet session.
Example
The following example specifies the default authentication method for a console.
Console(config)#
Console(config-line)#
Related Commands
aaa authentication login
aaa authentication enable
show authentication methods

enable authentication

The enable authentication Line Configuration mode command specifies the
authentication method list when accessing a higher privilege level from a remote
telnet or console. To return to the default configuration specified by the aaa
authentication enable command, use the
Syntax
enable authentication
no enable authentication
Parameters
•
default
command.
• list-name — Uses the indicated list created with the aaa authentication
enable command.
Default Setting
Uses the default set with the aaa authentication enable command.
Command Mode
Line Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing
a higher privilege level from a console.
Console(config)#
Console(config-line)#
292
line console
login authentication default
{
default
— Uses the default list created with the aaa authentication enable
line console
enable authentication default
form of this command.
no
| list-name}