Show Bridge Multicast Address-Table Static - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
----
1
19
Note: A multicast MAC address maps to multiple IP addresses as shown above.
Related Commands
bridge multicast address

show bridge multicast address-table static

The show bridge multicast address-table static Privileged EXEC mode command
displays the statically configured multicast addresses.
show bridge multicast address-table static [vlan vlan-id] [address
mac-multicast-address | ip-multicast-address] [source ip-address]
Parameters
• vlan-id — Indicates the VLAN ID. This has to be a valid VLAN ID value.
• mac-multicast-address — A valid MAC multicast address.
• ip-multicast-address — A valid IP multicast address.
• ip-address — Source IP address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it's in the range
0100.5e00.0000 through 0100.5e7f.ffff.
328
-----------------
224-239.130|2.2.3
224-239.130|2.2.8
------
2/e8
2/e8