Qos Map Dscp-Dp; Qos Map Policed-Dscp - Alcatel OmniStack LS 6248 User Manual

qos map dscp-dp

Use the
qos map dscp-dp
Drop Precedence. To return to the default setting, use the
Syntax
qos map dscp-dp
no qos map dscp-dp
Parameters
• dscp-list — Specifies up to 8 DSCP values separated by a space.
• dp — Enter the Drop Precedence value to which the DSCP value
corresponds. (Possible values are 0 - 2 where 2 is the highest Drop
Precedence)
• dp — Enter the Drop Precedence value to which the DSCP value
corresponds. (Possible values are 0 - 1 where 1 is the highest Drop
Precedence)
• Parameters Range
• dscp-list 0 -63
• dp 0 -2
• dp 0 -1
Default Setting
All the DSCPs are mapped to Drop Precedence 0.
Command Mode
Global Configuration mode.
Command Usage
There are no user guidelines for this command.
·
Example
The following example maps DSCP value 123 to Drop Precedence 1.
Console (config)# qos map dscp-dp 123 to 1
Related Commands
show qos interface

qos map policed-dscp

The
qos map policed-dscp
policed-DSCP map for remarking purposes. To return to the default map, use the
form of this command.
Syntax
qos map policed-dscp
no qos map policed-dscp
Global Configuration mode command to map DSCP to
dscp-list dp
to
Global Configuration mode command modifies the
dscp-list dscp-mark-down
to
QoS Commands
form of this command.
no
4
no
487