Chapter 3: Configuring The Switch; Using The Web Interface; Navigating The Web Browser Interface; Home Page - Alcatel OmniStack LS 6248 User Manual

Os-ls-6200 series
Hide thumbs Also See for OmniStack LS 6248:
Table of Contents

Advertisement

Chapter 3: Configuring the Switch

Using the Web Interface

This switch provides an embedded HTTP Web agent. Using a Web browser you can
configure the switch and view statistics to monitor network activity. The Web agent
can be accessed by any computer on the network using a standard Web browser
(Internet Explorer 6.0 or above, or Netscape Navigator 6.2 or above).
Note:
You can also use the Command Line Interface (CLI) to manage the switch over a
serial connection to the console port or via Telnet. For more information on using
the CLI, refer to Chapter 4: "Command Line Interface."
Prior to accessing the switch from a Web browser, be sure you have first performed
the following tasks:
1.
Configure the switch with a valid IP address, subnet mask, and default gateway
using an out-of-band serial connection, BOOTP or DHCP protocol.
2.
Set user names and passwords using an out-of-band serial connection. Access
to the Web agent is controlled by the same user names and passwords as the
onboard configuration program.
3.
After you enter a user name and password, you will have access to the system
configuration program.
Notes: 1.
If you log into the CLI interface as guest (Normal Exec level), you can view
the configuration settings or change the guest password. If you log in as
"admin" (Privileged Exec level), you can change the settings on any page.
2.
If the path between your management station and this switch does not pass
through any device that uses the Spanning Tree Algorithm, then you can set
the switch port attached to your management station to fast forwarding (i.e.,
enable Admin Edge Port) to improve the switch's response time to
management commands issued through the web interface.

Navigating the Web Browser Interface

To access the web-browser interface you must first enter a user name and
password. The administrator has Read/Write access to all configuration parameters
and statistics.

Home Page

When your web browser connects with the switch's web agent, the home page is
displayed as shown below. The home page displays the Main Menu on the left side
of the screen and System Information on the right side. The Main Menu links are
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents