Radius-Server Timeout - Alcatel OmniStack LS 6248 User Manual

Command Mode
Global Configuration mode
Command Usage
To define source-ip on the out-of-band port, use the out-of-band IP address
format - oob/ip-address.
Example
The following example configures the source IP address used for communication
with RADIUS servers to 10.1.1.1.
console(config)# radius-server source-ip 10.1.1.1
Related Commands
radius-server host
radius-server key
radius-server retransmit

radius-server timeout

radius-server deadtime
show radius-servers
radius-server timeout
The
radius-server timeout
during which the device waits for a server host to reply. To return to the default
configuration, use the
Syntax
radius-server timeout
no radius-server timeout
Parameters
• timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
Default Setting
The timeout value is 3 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the timeout interval to 5 seconds.
Console(config)# radius-server timeout 5
Global Configuration mode command sets the interval
form of this command.
no
timeout
RADIUS Commands
4
499