Uploading System Files - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
commands:
copy tftp
Console#
4-365
Accessing file 'file1' on 172.16.101.101..
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!! [OK]
Copy took 0:01:11 [hh:mm:ss]

Uploading System Files

The File Upload Page contains fields for uploading the software from the device to
the TFTP server.
Command Attributes
• Firmware Upload — Specifies that the software image file is uploaded. If
Firmware Upload is selected, the Configuration Upload fields are grayed out.
• Configuration Upload — Specifies that the Configuration file is uploaded. If
Configuration Upload is selected, the Software Image Upload fields are grayed out.
• Software TFTP Server IP Address — Specifies the TFTP Server IP Address to
which the Software Image is uploaded.
• Software Destination File Name — Specifies the software image file path to
which the file is uploaded.
• Configuration TFTP Server IP Address — Specifies the TFTP Server IP Address
to which the Configuration file is uploaded.
• Configuration Destination File Name— Specifies the file name to which the
Startup Configuration file is uploaded.
• Configuration Transfer file name — Specifies the Configuration file name that is
uploaded. The possible field values are:
• Running Configuration — Uploads the Running Configuration file.
• Startup Configuration — Uploads the Startup Configuration file.
Web – Click System, System Management, File Management, File Upload. Define
64
//
: 172.16.101.101/file1
image