Table of Contents
Advertisement
4
Command Line Interface
show interfaces switchport
The
show interfaces switchport
switchport configuration.
Syntax
show interfaces switchport {ethernet
port-channel-number}
Parameters
• interface — A valid Ethernet port number.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the switchport configuration for Ethernet port 1/e1.
show interface switchport ethernet
Console#
Port 1/e1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled, Uplink is 1/e9.
Port 1/e1 is member in:
Vlan
----
1
8
11
684
Privileged EXEC mode command displays the
Name
-------
default
VLAN008
VLAN011
interface |
port-channel
1/e1
Egress rule
-----------
untagged
tagged
tagged
Type
-------
System
Dynamic
Static
Hide quick links:
Advertisement
Table of Contents
