Alcatel OmniStack LS 6248 User Manual page 391

!
.
Copying an Image File from a Server to Flash Memory
To copy an image file from a server to flash memory, use the
command.
image
Copying a Boot File from a Server to Flash Memory
To copy a boot file from a server to flash memory, enter the
command.
boot
Copying a Configuration File from a Server to the Running Configuration File
To load a configuration file from a network server to the running configuration
file of the device, enter the
commands in the loaded configuration file are added to those in the running
configuration file as if the commands were typed in the command-line
interface (CLI). Thus, the resulting configuration file is a combination of the
previous running configuration and the loaded configuration files with the
loaded configuration file taking precedence.
Copying a Configuration File from a Server to the Startup Configuration
To copy a configuration file from a network server to the startup configuration
file of the device, enter
configuration file is replaced by the copied configuration file.
Storing the Running or Startup Configuration on a Server
Use the
copy running-config
configuration file to a network server using TFTP. Use the
destination-url command to copy the startup configuration file to a network
server.
Saving the Running Configuration to the Startup Configuration
To copy the running configuration to the startup configuration file, enter the
copy running-config startup-config
Backing up the Running or Startup Configuration to a Backup Configuration
File
To copy the running configuration file to a backup configuration file, enter the
copy running-config file
backup configuration file, enter the
Before copying from the backup configuration file to the running configuration
file, make sure that the backup configuration file has not been corrupted.
Configuration and Image File Commands
For network transfers, indicates that the copy process is taking
place. Each exclamation point indicates successful transfer of
ten packets (512 bytes each).
For network transfers, indicates that the copy process timed out.
Generally, many periods in a row means that the copy process
may fail.
source-url
copy
source-url
copy startup-config
destination-url command to copy the current
command.
command. To copy the startup configuration file to a
copy startup-config file
copy
copy
command. The
running-config
. The startup
copy startup-config
command.
4
source-url
source-url
367