Mac Access-List - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
IP Protocol
Open Shortest Path Protocol
Protocol Independent Multicast
Layer Two Tunneling Protocol
ISIS over IPv4
(any IP protocol)
Default Setting
This command has no default configuration
Command Mode
IP-Access List Configuration mode
Command Usage
Use the
ip-access-list
IP-Access List Configuration mode.
Before an Access Control Element (ACE) is added to an ACL, all packets are
permitted. After an ACE is added, an implied
the end of the list and those packets that do not match the defined conditions
are denied.
Examples
The following example shows how to define a permit statement for an IP ACL.
Console(config)#
Console(config-ip-al)#
Related Commands
ip-access-list
permit (ip)
show access-lists

mac access-list

The
mac access-list
List Configuration mode and creates Layer 2 ACLs. To delete an ACL, use the
form of this command.
Syntax
mac access-list
no mac access-list
306
Global Configuration mode command to enable the
ip-access-list
deny
rsvp 192.1.1.1 0.0.0.255
Global Configuration mode command enables the MAC-Access
name
name
Abbreviated Name
ospf
pim
l2tp
isis
any
deny-any-any
ip-acl1
Protocol Number
89
103
115
124
(25504)
condition exists at
any
no