police aggregate
The
police aggregate
aggregate policer to multiple classes within the same policy map. To remove an
existing aggregate policer from a policy map, use the
Syntax
police aggregate
no police aggregate
Parameters
• aggregate-policer-name — Specifies the name of the aggregate policer.
Default Setting
This command has no default configuration.
Command Mode
Policy-map Class Configuration mode
Command Usage
An aggregate policer can be applied to multiple classes in the same policy
map; An aggregate policer cannot be applied across multiple policy maps or
interfaces.
To return to the Policy-map Configuration mode, use the
return to the Privileged EXEC mode, use the
Example
The following example applies the aggregate policer called policer1 to a calass
called class1 in policy map called policy1.
Console(config)#
Console(config-pmap)#
Console(config-pmap-c)#
Related Commands
police
qos aggregate-policer
show qos aggregate-policer
wrr-queue cos-map
The
wrr-queue cos-map
Service (CoS) values to a specific egress queue. To return to the default
configuration, use the
Syntax
wrr-queue cos-map
no wrr-queue cos-map
Policy-map Class Configuration mode command applies an
aggregate-policer-name
aggregate-policer-name
policy-map
policy1
class
class1
police aggregate
Global Configuration mode command maps Class of
form of this command.
no
queue-id cos1...cos8
[queue-id]
QoS Commands
form of this command.
no
command. To
exit
end
command.
policer1
4
481