Table of Contents
Advertisement
show line
The
User EXEC mode command displays line parameters.
show line
Syntax
show line [console
Parameters
•
— Console terminal line.
console
•
— Virtual terminal for remote console access (Telnet).
telnet
•
— Virtual terminal for secured remote console access (SSH).
ssh
Default Setting
If the line is not specified, the default value is console.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the line configuration.
show line
Console>
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
|
|
]
telnet
ssh
4
Line Commands
443
Hide quick links:
Advertisement
Table of Contents
