Command Mode
Global Configuration mode
Command Usage
The command is relevant for both received unicast and broadcast.
If there is at least 1 trusted key, then unauthenticated messages will be
ignored.
Examples
The following example authenticates key 8.
Console(config)#
Console(config)#
Console(config)#
Related Commands
sntp authentication-key
sntp authenticate
sntp client poll timer
sntp broadcast client enable
sntp anycast client enable
sntp unicast client enable
sntp unicast client poll
sntp client poll timer
The
sntp client poll timer
for the Simple Network Time Protocol (SNTP) client. To return to default
configuration, use the
Syntax
sntp client poll timer
no sntp client poll timer
Parameters
• seconds — Polling interval in seconds (Range: 60-86400)
Default Setting
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
sntp authentication-key
sntp trusted-key
sntp authenticate
Global Configuration mode command sets the polling time
form of this command.
no
seconds
md5
8
ClkKey
8
4
Clock Commands
355