3
Configuring the Switch
CLI – The following is an example of the CLI commands used for configuring Local
Users Passwords:
Console(config)#
4-297
Defining Line Passwords
Network administrators can define line passwords in the Line Page. After the line
password is defined, a management method is assigned to the password. The
device can be accessed using the following methods:
• Console
• Telnet
• Secure Telnet
Command Attributes
To define line passwords:
• Console Line Password — Defines the line password for accessing the device
via a Console session. Passwords can contain a maximum of 159 characters.
• Telnet Line Password — Defines the line password for accessing the device via
a Telnet session. Passwords can contain a maximum of 159 characters.
• Secure Telnet Line Password — Defines the line password for accessing the
device via a secure Telnet session. Passwords can contain a maximum of 159
characters.
• Confirm Password — Confirms the new line password. The password appears in
the ***** format.
102
Figure 3-41. Local Users Page
username
password
bob
level
lee
15