Radius-Server Source-Ip - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Syntax
radius-server retransmit
no radius-server retransmit
Parameters
• retries — Specifies the retransmit value. (Range: 1 - 10)
Default Setting
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list
of RADIUS server hosts to 5 times.
console(config)# radius-server retransmit 5
Related Commands
radius-server host
radius-server key

radius-server source-ip

radius-server timeout
radius-server deadtime
show radius-servers
radius-server source-ip
The
radius-server source-ip
source IP address used for communication with RADIUS servers. To return to the
default configuration, use the
Syntax
radius-server source-ip
no radius-source-ip
Parameters
• source — Specifies a valid source IP address.
Default Setting
The source IP address is the IP address of the outgoing IP interface.
498
retries
Global Configuration mode command specifies the
form of this command.
no
source
source