Show Ip Source-Guard Inactive - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Parameters
• mac-address — Specifies a MAC address.
• ip-address — Specifies an IP address.
• vlan-id — Specifies a VLAN number.
• interface — Specifies an Ethernet port.
• port-channel-number — Specifies a port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the IP source guard configuration.
Console# show ip source-guard
IP source guard is enabled.
Interface Filter
---------- ----------
- -
1/21 IP
1/22 IP
1/22 IP
1/22 IP
1/23 IP
1/24 IP
1/32 IP

show ip source-guard inactive

The show ip source-guard inactive EXEC mode command displays the IP source
guard inactive addresses.
Syntax
show ip source-guard inactive
644
Status IP Address MAC
---------- ----------
- -
Active 10.1.8.1
Active 10.1.12.2 0060.704C.
Active 10.1.8.2
Active 10.1.12.2 0060.704C.
Active Deny All
Active 10.1.8.218 0060.704C.
Inactive 10.1.8.32 0060.704C.
VLAN
Address
---------- ----------
- -
0060.704C. 3
73FF
4
7BC3
0060.704C. 3
7BC1
4
7BC3
3
7BAC
3
83FF
Type
----------
-
DHCP
DHCP
DHCP
DHCP
Static
DHCP