Show Ports Monitor - Alcatel OmniStack LS 6248 User Manual

Example
The following example copies traffic on port 1/e8 (source port) to port 1/e1
(destination port).
Console(config)#
Console(config-if)#
Related Commands

show ports monitor

show ports monitor
show ports monitor
The
show ports monitor
monitoring status.
Syntax
show ports monitor
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example shows how the port monitoring status is displayed.
show ports monitor
Console#
Source Port
-----------
1/e1
1/e2
1/e18
Related Commands
port monitor
show ports monitor
interface ethernet
port monitor
User EXEC mode command displays the port
Destination Port
----------------
1/e8
1/e8
1/e8
Port Monitor Commands
1/e1
1/e8
Type Status
----- -------
RX,TX Active
RX,TX Active
RX Active
4
VLAN Tagging
------------
No
No
No
459