Tacacs-Server Key - Alcatel OmniStack LS 6248 User Manual

interface.
• priority — Determines the order in which the TACACS+ servers are used,
where 0 is the highest priority. (Range: 0 - 65535)
Default Setting
No TACACS+ host is specified.
If no port number is specified, default port number 49 is used.
If no host-specific timeout, key-string or source value is specified, the global
value is used.
If no TACACS+ server priority is specified, default priority 0 is used.
Command Mode
Global Configuration mode
Command Usage
Multiple tacacs-server host commands can be used to specify multiple hosts.
Example
The following example specifies a TACACS+ host.
Console(config)#
Related Commands

tacacs-server key

tacacs-server timeout
tacacs-server source-ip
show tacacs
tacacs-server key
The
tacacs-server key
encryption key used for all TACACS+ communications between the device and the
TACACS+ daemon. To disable the key, use the
Syntax
tacacs-server key
no tacacs-server key
Parameters
• key-string — Specifies the authentication and encryption key for all
TACACS+ communications between the device and the TACACS+ server.
This key must match the encryption used on the TACACS+ daemon.
(Range: 0-128 characters)
Default Setting
Empty string.
tacacs-server host
Global Configuration mode command sets the authentication
key-string
TACACS+ Commands
172.16.1.1
form of this command.
no
4
623