Radius Commands; Radius-Server Host - Alcatel OmniStack LS 6248 User Manual

RADIUS Commands

Command Function

radius-server host

Specifies a RADIUS server host. To delete the specified RADIUS
host, use the no form of this command.
radius-server key Sets the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
To return to the default configuration, use the no form of this
command.
radius-server Specifies the number of times the software searches the list of
retransmit RADIUS server hosts. To reset the default configuration, use the
no form of this command.
radius-server Specifies the source IP address used for communication with
source-ip RADIUS servers. To return to the default configuration, use the
no form of this comman.
radius-server Sets the interval during which the device waits for a server host to
timeout reply. To return to the default configuration, use the no form of this
command.
radius-server Improves RADIUS response time when servers are unavailable.
deadtime The command is used to cause the unavailable servers to be
skipped. To return to the default configuration, use the no form of
this command.
show radius-servers Displays the RADIUS server settings.
radius-server host
The
radius-server host
server host. To delete the specified RADIUS host, use the
Syntax
radius-server host
[ timeout] [
timeout
[ source] [
source
no radius-server host
Parameters
• ip-address — IP address of the RADIUS server host.
• hostname — Hostname of the RADIUS server host.
(Range: 1-158 characters)
• auth-port-number — Port number for authentication requests. The host is
not used for authentication if the port number is set to 0. (Range: 0-65535)
• timeout — Specifies the timeout value in seconds. (Range: 1-30)
• retries — Specifies the retransmit value. (Range: 1-10)
• deadtime — Length of time in minutes during which a RADIUS server is
Table 4-25. RADIUS Commands
Global Configuration mode command specifies a RADIUS
{ip-address | hostname} [
retries] [
retransmit
priority] [
priority usage
{ip-address | hostname}
RADIUS Commands
no
auth-port-number]
auth-port
deadtime] [
deadtime
type]
Mode Page
GC 4-495
GC 4-497
GC 4-497
GC 4-498
GC 4-499
GC 4-500
GC 4-501
form of this command.
key-string]
key
4
495