Address Table Commands - Alcatel OmniStack LS 6248 User Manual

Address Table Commands

.
Command Function
bridge address Adds a MAC-layer station source address to the bridge table. To
delete the MAC address, use the no form of this command.
bridge multicast Enables filtering multicast addresses. To disable filtering multicast
filtering addresses, use the no form of this command.
bridge multicast Registers a MAC-layer multicast address in the bridge table and
address statically adds ports to the group. To unregister the MAC address,
use the no form of this command
bridge multicast Forbids adding a specific multicast address to specific ports. Use
forbidden address the no form of this command to return to the default configuration.
bridge multicast Use the bridge multicast ip-address interface configuration
forward-all command to register IP-layer multicast address to the bridge
table, and to add statically ports to the group.
bridge multicast Enables forwarding all multicast packets on a port. To restore the
forward-all default configuration, use the no form of this command.
bridge multicast Forbids a port to be a forward-all-multicast port. To restore the
forbidden default configuration, use the no form of this command.
forward-all
bridge aging-time Sets the address table aging time. To restore the default
configuration, use the no form of this command.
clear bridge Removes any learned entries from the forwarding database.
port security Locks the port, thereby, blocking unknown traffic and preventing
the port from learning new addresses. To return to the default
configuration, use the no form of this command.
port security mode Configures the port security mode. To return to the default
configuration, use the no form of this command.
port security max Configures the maximum number of addresses that can be
learned on the port while the port is in port security mode. To
return to the default configuration, use the no form of this
command.
port security routed Adds a MAC-layer secure address to a routed port. Use the no
secure-address form of this command to delete a MAC address.
show bridge Displays all entries in the bridge-forwarding database.
address-table
show bridge Displays statically created entries in the bridge-forwarding
address-table static database.
show bridge Displays the number of addresses present in the Forwarding
address-table countt Database.
show bridge Displays bridge multicast address table information
multicast
address-tablet
Table 4-8. Address Table Commands
Address Table Commands
Mode
ICV
GC
ICV
ICV
ICV
ICV
ICV
GC
PE
IC
IC
IC
IC
PE
PE
PE
UE
4
Page
4-314
4-315
4-316
4-317
4-318
4-318
4-319
4-319
4-320
4-321
4-321
4-322
4-323
4-324
4-325
4-326
4-327
313