Figure 3-99. Mstp Interface Settings Page - Alcatel OmniStack LS 6248 User Manual

• Path Cost — Indicates the port contribution to the Spanning Tree instance. The
range should always be 1-200,000,000.
• Designated Bridge ID — Displays the ID of the bridge that connects the link or
shared LAN to the root.
• Designated Port ID — Displays the ID of the port on the designated bridge that
connects the link or the shared LAN to the root.
• Designated Cost — Indicates that the default path cost is assigned according to
the method selected on the Spanning Tree Global Settings page.
• Forward Transitions — Indicates the number of times the LAG State has
changed from a Forwarding state to a Blocking state.
• Remain Hops — Indicates the hops remaining to the next destination.
Web – Click Layer 2, Spanning Tree, MSTP, Interface Settings. Define the fields and
Click Apply.

Figure 3-99. MSTP Interface Settings Page

CLI –The following is an example of the MSTP Interface Settings commands.
Console (config) #
4-551
Console(config)#
4-376
Console(config-if)#
4-546
Console(config-if) #
4-554
spanning-tree mst
interface ethernet
spanning-tree mst
spanning-tree mst
Configuring Spanning Tree
priority
1 4096
g1
port-priority
1
cost
1 4
3
144
203